solidworks的剖面线线型定义和autocad相同,它使用了autocad的剖面线定义方法,与autocad通用.因此,可以对剖面线进行定义.
方法:修改\SolidWorks\lang\chinese-simplified\sldwks.prn
用笔记本打开该文件,添加需要的线形.如
;; Based on AutoCAD Ver.13.0s Hatch Pattern File
;;;; solidworks 区域剖面线定义文件 ::
*金属, (Iron BrickStone), ANSI Iron, Brick, Stone masonry
45, 0,0, 0,.125
*塑料, (Lead Zinc Mg), ANSI Lead, Zinc, Magnesium, Sound/Heat/Elec Insulation
45, 0,0, 0,.125
135, 0,0, 0,.125
*玻璃,AR-GLASS@1.0
45,0,0,0,0.5, 0.5,-0.5
45,0,0.1414214, 0,0.5, 0.3,-0.7
45,0.1414214,0, 0,0.5, 0.3,-0.7
*软木, Cork material@1.0
0, 0,0, 0,.125
135, .0625,-.0625, 0,.35355339, .176776696,-.176776696
135, .09375,-.0625, 0,.35355339, .176776696,-.176776696
135, .125,-.0625, 0,.35355339, .176776696,-.176776696
*无, None
删除不需要的定义类型,可以大大提高solidworks 的启动速度.