纺织印染废水的湿式空气氧化处理

时间:2021-12-14 09:37:47 环境保护论文 我要投稿

纺织印染废水的湿式空气氧化处理

摘要: 研究了用湿式空气氧化法处理纺织印染废水的过程,并建立了相应的动力学模型.在300℃下,用湿式空气氧化法处理120 min可使纺织印染废水的COD去除率达到56%,同时,可使废水的可生化降解性由0.04提高到0.40,有利于对这种废水进行进一步的.处理.印染废水的污染物由多种组分构成,在一定的反应温度下有些污染物能被氧化,有些污染物则不能被氧化.根据这一特点建立了纺织印染废水湿式氧化过程的动力学模型,模型拟合结果与实验数据吻合良好. Abstract: The wet air oxidation of printing and dying wastewater and its reaction kinetics were investigated in the present work. A COD removal of 56% was obtained after the wastewater was treated with wet air oxidation at 300 ℃ for 120 min. Furthermore, the biodegradability of the wastewater was improved from 0. 04 to 0. 40. The printing and dying wastewater contain many kinds of pollutants, such as dyestuff and dying auxiliary; some of the pollutants are easy to be oxidized, while the others are difficult to be oxidized. A kinetic model for the wet air oxidation of printing and dying wastewater was constructed on the basis of the reaction characters, and the model simulations were in good agreement with experimental data. 作 者: 刘刚    雷乐成    岑沛霖    LIU Gang    LEI Le-cheng    CEN Pei-lin   作者单位: 浙江大学化学工程学系,  期 刊: 浙江大学学报(工学版)  ISTICEIPKU   Journal: JOURNAL OF ZHEJIANG UNIVERSITY(ENGINEERING SCIENCE)  年,卷(期): 2001, 35(1)  分类号: X703  关键词: 印染废水    湿式空气氧化    反应动力学    废水处理   

【纺织印染废水的湿式空气氧化处理】相关文章:

催化湿式空气氧化(CWAO)处理染料废水07-11

缓和湿式空气氧化技术在炼油碱渣处理中的应用10-11

催化湿式氧化法处理对硝基酚废水07-30

催化湿式氧化法预处理显影废水的研究01-18

湿式催化氧化处理炼油碱渣废水试验研究07-07

纺织印染行业清洁生产和废水处理07-09

滴流床反应器催化湿式氧化法处理碱渣废水01-17

多相催化湿式氧化法处理高浓度难降解有机废水的研究07-19

乳化液废水的均相催化湿式氧化11-22